Noticeable quiet | Efficient | Effortless
I-Line offers two 2-channel class-D power amplifiers with switching mode power supply.
IA 402D provides 2x 200 Watts at 8 Ohms or 2x 400 Watts at 4 Ohms.
The amplifier is equipped with a digital encoder with push button for DSP preset selection, delay settings, EQ adjustments and more.
Sensor-controlled fan and optimized front-to-back air flow, together with very low idle power consumption, ensure low noise levels for quiet environments at all times.
A combination of XLR, speakON®- and Phoenix-connectors for in- and output ensures maximum flexibility during the installation process.
IA 402D power amplifier is equipped with 3 most widely used analog input and output connections in professional audio. 2 channel XLR inputs with link outputs together with Phoenix MSTB 3-pin inputs will cover most of the input needs. Outputs are equipped with 3x Neutrik speakON® connectors in parallel with 4-pin Phoenix MSTB connectors for maximum flexibility.
24bit/48kHz DSP processor provides all I-line speakers with correct and precise filter, EQ and limiter settings. As always - good sounding and well protected speaker systems are the ultimate aim of the SE AUDIOTECHNIK engineering team. Built-in speaker presets, EQ control, delay and other features allow for an easy, cost-effective and quick system setup and tuning.
Thông số kỹ thuật
|Power Output:||2 x 400W @ 4 Ω , 2 x 200W @ 8 Ω, 2 x 100W @ 16 Ω|
|Minimum Load Impedance:||4 Ω|
|Input Impedance:||20 kΩ balanced, 10 kΩ unbalanced|
|SNR (At rated power):||95 dB|
|DSP:||48 kHz, 24-bit DSP processor, processing latency: 1.1 ms|
|Signal Processing:||Speaker presets, Delay, High Shelf, High-Pass, Parametric Equalizer, Limiter, Phase Invert, Mute, Input Gain|
|Controls:||Digital encoder with push button|
|Maximum Input Level:||+20 dBu|
|Signal Connectors:||XLR 3-pin male line-level inputs/link outputs, Phoenix Contact MSTB 3-pin inpults/link outputs|
|Speaker Connectors:||Neutrik Speakon® NL4 outputs, Phoenix Contact MSTB 4-pin outputs|
|Protection:||short-circuit, over-heating, over-current|
|Cooling:||Sensor controlled fan, front-to-back air flow|
|Power Consumption (Idle, Full Power):||30 W / 1000 W|
|Power Requirements:||100 - 240 VAC|
|Dimensions (W x H x D):||483 x 66 x 256 mm / 1.5 HU|
|Weight:||5.1 kg (netto)|